Sovol SH04 Multicolor 3D Filament Dryer Box – SOVOL

Sovol SH04 filament dryer box accommodates 4 spools (1kg/0.25kg/0.5kg) and ensures rapid, even drying with 690W heating power and intelligent temperature control (45-55°C). Perfect …

CouponFollow Extension

40%
OFF

Filament Dryer Good Enough? : R/Sovol - Reddit

4 days from now

Just picked up a Sovol dual filament dryer to keep some PETG in check. I ran a 6 hour cycle and got the box contents down from 40% to as low as 24%, but it slowly crept back up to 27% …

reddit.com

FAQs about Sovol SH04 Multicolor 3D Filament Dryer Box – SOVOL Coupon?

How does the sovol filament dryer work?

In the box, you get the Sovol Filament Dryer and a 12V power supply. The inside of the filament dryer is more interesting. With the Sovol Filament Dryer you can use two spools of filament at the same time (depending on the type of spools you have). The spools rest on metallic supports which spin on the integrated bearings. ...

What is the sovol filtration dryer made of?

As you might expect, there’s not a lot to talk about when it comes to the design. The Sovol Filament Dryer is made from ABS and PC, where half of the box is white and the second half is transparent. In the front, we have an illuminated screen with three capacitive buttons. ...

Is the sovol SH01 a good filament dryer?

Sovol SH01 filament dryer upgrade and modifications - details inside. I needed a filament dryer for PLA and ran across the Sovol SH01. The unit had decent reviews, has a fan, and can dry two spools at a time which is nice. I found the unit on Amazon during a lightning deal and ordered one up. ...

Can I use a sovol filament dryer as a dry box?

It also works well as a filament dryer, as long as you open the cover from time to time, or include some silica gel bags in the container, during drying. The Sovol Filament Dryer works great as a dry box, but needs special treatment to be used as a filament drying solution which actually removes moisture from the material. ...

How much power does a sovol filter dryer use?

When the Sovol Filament Dryer is running, it pulls close to 40W from the wall. All these measurements were taken with a Blitzwolf smart power socket which indicates the power draw, and it can also be used for remotely powering on and off the printer. The Sovol Filament Dryer can be pretty silent if the fan is properly attached to the chassis. ...

How much does a sovol filament dryer weigh?

The weight of the spool increased from 556g to 570g. The 570g was the weight with a bunch of shacking and drying of the physical water off and in the filament winding. I ran the filament dryer for multiple cycles, up to around 32 hours and over the course of the Sovol filament dryer box testing it reduced its weight to 560g. ...